Kugelmann Maschinenbau KS 1200 Operating Instructions Manual Download

Page: 21 / 79

ORIGINAL OPERATING INSTRUCTIONS

Safety instructions

27.06.2018

21/79

Warning

Starting movement of the blower or brushes when connecting the hydraulic lines.
Risk of serious injury.

•

Connect hydraulic lines only if the hydraulic cycle of the carrier vehicle and the
sweeping suction combination are depressurised!

Warning

Damaged hydraulic lines.
Risk of serious injury.

•

Damaged hydraulic lines must be replaced immediately!

•

After 6 years at the latest, replace hydraulic lines even if they are not damaged!

Warning

Flying debris.
Risk of serious injury.

•

Never stay in the working range of the sweeping suction combination!

Caution

First commissioning without instruction.
Risk of injury or property damage.

•

First commissioning of the sweeping suction combination must be accomplished
by employees of the dealer, the manufacturer or a representative of our works!

Caution

Sweeping suction combination is not jacked up high enough.
Danger of property damage.

•

When mounting or removing the sweeping suction combination, please make
sure that it is jacked up high enough!

Summary of Contents for KS 1200
















































































Search results

Summary of Contents for KS 1200

Reviews:

Related manuals for KS 1200

Brands by name

Popular brands

Kugelmann Maschinenbau KS 1200, Operating Instructions Manual

Search results

Summary of Contents for KS 1200

Reviews:

Related manuals for KS 1200

Brands by name

Popular brands