Kugelmann Maschinenbau KS 1200 Operating Instructions Manual Download

Page: 25 / 79

ORIGINAL OPERATING INSTRUCTIONS

Safety instructions

27.06.2018

25/79

Caution

Opening the debris container during operation.
Risk of injury.

•

Switch off the blower before controlling the filling level of the debris container!

Caution

Transport journeys without lifting the brushes.
Risk of injury or property damage.

•

Transport journeys only with lifted brush unit (secured in parking position)!

Caution

Transport journeys without lowering the debris container.
Risk of injury or property damage.

•

Carry our transport journeys only with completely lowered debris container!

Caution

Limbs getting caught.
Risk of injury.

•

Never put your hands between moving parts!

Caution

Parts continue to run.
Risk of injury.

•

Please wait until all parts stand still and disconnect hydraulic lines before
performing any work!

Caution

The hydraulic system is under high pressure.
Risk of injury or property damage.

•

If any hydraulic fluid that leaks out passes through the skin, seek medical advice
immediately!

Summary of Contents for KS 1200
















































































Search results

Summary of Contents for KS 1200

Reviews:

Related manuals for KS 1200

Brands by name

Popular brands

Kugelmann Maschinenbau KS 1200, Operating Instructions Manual

Search results

Summary of Contents for KS 1200

Reviews:

Related manuals for KS 1200

Brands by name

Popular brands