9
•
Potential cause: the fixture does not react to the beat of music.
•
Remedies: Ensure that fixture is not connected to a DMX signal
•
Tap the microphone to ensure that it is functioning, the fixture should react when
in sound activation mode.
D. Fixture does not respond to DMX control
•
Potential cause: fault in the DMX network due to connector or cable damaged, or
incorrect DMX addressing, or potential interference from proximity to a high
voltage installation.
•
Remedies: Check that the fixture DMX LED is on, and if not, check all DMX
cables and connections to ensure the integrity of the physical network.
In order to make the lights in good condition and extend the life time, we suggest
a regular cleaning to the lights.
•
Clean the inside and outside lens each week to avoid the weakness of the lights
due to accumulation of dust.
•
Clean the fan each week.
•
A detailed electric check by approved electrical engineer each three month, make
sure that the circuit contacts are in good condition, prevent the poor contact of
circuit from overheating
•
The cleaning of external optical lenses must be carried out periodically to
optimize light output. Cleaning schedules for lighting fixtures vary greatly
depending on the operating environment.
•
It is therefore impossible to specify precise cleaning intervals for the fixture,
environmental factors that may result in a need for frequent cleaning include:
•
Use of smoke or fog machines.
•
High airflow rates
（
near air conditioning vents, for example.
）
•
Presence of cigarette smoke.
•
Airborne dust (from stage effects, building structures and fittings or the natural
environment at outdoor events, for example.
•
Use gentle pressure only when cleaning, and work in a clean, well-lit area.
•
Do not use any product that contains solvents or abrasives, as these can cause
surface damage.
