Kudux Super LED Strobe 1500, User Manual

Page: 8 / 10

WWW.KUDUX.COM 8
Channel 2 0 ~ 255 Red 1
Channel 3 0 ~ 255 Red 2
Channel 4 0 ~ 255 Red 3
Channel 5 0 ~ 255 Red 4
Channel 6 0 ~ 255 Green 1
Channel 7 0 ~ 255 Green 2
Channel 8 0 ~ 255 Green 3
Channel 9 0 ~ 255 Green 4
Channel 10 0 ~ 255 Blue 1
Channel 11 0 ~ 255 Blue 2
Channel 12 0 ~ 255 Blue 3
Channel 13 0 ~ 255 Blue 4
Channel 14 0 ~ 255 Intensity of Flash
Channel 15 0 ~ 255 Flash
Channel 16 0 ~ 255 Random strobe
Channel 17 0 ~ 255 Special effect
Channel 18 0 ~ 255 Speed of effect
7. Cleaning and maintenance
The following points have to be considered during the inspection:
•
All screws for installing the devices or parts of the device have to be tightly connected and
must not be corroded.
•
There must not be any deformations on the housing, color lenses, fixations and installation
spots (ceiling, suspension, trussing).
•
Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
8. Troubleshooting
：
This section describes a few common problems that may occur during operation
and provides some suggestions for easy troubleshooting.
A. Lights can’t work, no lights out
•
Check power connection, the fuse whether is ok.
•
Check power input whether correct.
B. Can’t DMX control.
•
DMX signal indicator must be on, if not, check the DMX cable.
•
If DMX signal is OK, check the DMX address whether set OK.
•
If DMX signal not consistent, check the DMX port connect.
C. Sound activation does not work