14
After Sales Support
Telephone:
1300 663 907
Email: [email protected]
Other Useful Information
Rubber Drive Gear
Your Professional Blender comes with a spare rubber drive gear. It is possible the original
rubber drive gear will deteriorate over time, so you may need to replace it. The gear
provides positive contact between the zinc alloy drive gear on the container and the motor
base. It is located within the drive gear on top of the motor base.
WARNING: Unplug blender from power outlet before replacing the rubber drive gear.
Cleaning and Storage
To clean motor base, unplug from power outlet. Use a moist cloth to wipe down the
exterior. Do not submerge the motor base in water. To clean the container, lid, lid plug and
tamper, wash thoroughly in warm soapy water, rinse and dry.
Ensure new rubber drive gear sits
flush.
Ensure motor is unplugged from
outlet and that you have the spare
rubber drive gear ready.
Remove existing rubber drive gear
using small pliers, gently pull up to
pull the gear out.
Push new rubber drive gear in the
opening, it will slot into place.
4.
1.
2.
3.
