Road transport
40
General
The following worksteps are described in this section:
•
Prior to road transport.
•
Fold up the machine.
•
Resetting the field cleaning.
•
Releasing the running wheel latch.
•
Secure the machine.
Observe transport width
Observe the permissible transport widths. Fold the machine into
the transport position and attach lights, warning signs and
protective equipment. The driver and keeper of the vehicle are
liable for any non-compliance with national traffic regulations.
Clean lighting equipment before travelling on the road
All lighting equipment must be cleaned before road transport.
Crop residue or dirt may cover up the lighting equipment and
adversely affect its correct operation. There is otherwise the risk
of traffic accidents and accidents with fatal consequences.
Observe the contour of the terrain
Move the machine onto ground that is as flat as possible before
changing from work to transport position. Avoid inclines on which
the combination (tractor and machine) could slip or overturn.
There is an increased risk of tipping and injury in a position at right
angles to the direction of the slope.
