Preparing for operation
35
General
The following applies when performing all adjustment work:
•
Check the tyre pressure.
•
Secure the machine.
•
Lower the machine to its work position.
•
Undo the appropriate bolts.
•
Make the required adjustment.
•
Retighten the bolts.
Adjust the following work settings:
•
Rotor pitch
•
Tine height
Adjusting the
working depth
The distance between the tine and ground is adjusted in the work
position via the height of the lower link.
Switch off the tractor PTO stub shaft drive.
Use the tractor's hydraulic control device to fold the machine into
its work position.
Align the running wheels by driving forwards.
Adjust the lower link to the required height to adjust the distance
between the tines and the ground. The tines must only just be
touching the ground.
Lower link
