Kubota Super Series 2 KX 91-3, Operator'S Manual

Page: 74 / 98

REGULAR CHECKS AND MAINTENANCE WORK 54
B
Checking Fuel Line and Intake Air Line
1. Check to see that all lines and hose clamps are
tightened and not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
EVERY 250 SERVICE HOURS
Do all 50 hour servicing at the same time.
B
Changing Engine Oil(First Engine Oil
Change after 50 Service Hours)
To avoid personal injury:
A
First stop the engine then remove the key and
wait long enough for the oil to cool down.
1. Remove the drain plug on the underside of the engine
and drain all oil.
2. Re-tighten the drain plug.
3. Fill through the filling port up the specified level.
4. Let the engine idle for approx. 5 min. Check the engine
oil level. To check the engine oil level, insert the
engine oil dipstick completely into the respective port
opening and pull out again. If the oil level lies between
both markings, no oil must be added.
(1) Fuel lines
(2) Clamp bands
(1) Hoses
(2) Hose clamps
(1) Drain plug
(1) Oil filling port