Kubota RTV 400 CAB, Installation & Owner'S Manual, Page: 3 / 18

SAFETY LABELS:
1) WARNING - K7561-65412 2) WARNING - CUR192
3) CUR193
4) Kubota ROPS serial number
5) WARNING - 77700-03684
TOOLS REQUIRED:
p. 3 of 18
Set of standard and metric sockets
Set of standard and metric open end wrenches
One 3/8” Drive Ratchet
One 3/16” Allen Wrench (preferably “T” handle
type)
Needle Nose Pliers
!
WARNING:
K 7 5 6 1 - 6 5 4 1 2
TO AVOID PERSONAL
INJURY OR DEATH:
1. Do not remove Roll-Over
Protective Structures
(ROPS) for any
application.
2. Do not modify or repair
a ROPS because
welding, grinding,
drilling or cutting any
portion may
weaken the
structure.
WARNING:
PINCH
POINT
PULL PINS TO OPEN & CLOSE COWL
!
WARNING:
To Prevent Serious Injury or Death.
This cab has been tested and approved for the RTV400 only.
Use of this cab on other models could result in excessive carbon monoxide exposure.
Do not remove or alter this tab.
77700-03684
CAB INSTALLATION
BEFORE YOU START
HELPFUL REMINDERS:
A. Refer to the parts diagram towards the back of each
section to help identify parts during the assembly
process.
B. To assist with the cab installation, leave all bolts
loose for later adjustment unless otherwise specified.
C. Read and understand all instructions before beginning.
D. Use caution to avoid damaging the factory installed
weld nuts or threaded inserts. Begin the bolt
engagement by hand to avoid or correct potential
cross threading.
KUBOTA
Manufacturing of
America Corp. Gainesville GA.
Machine Model No.
RTV500 / RTV400ci
ROPS MODEL
No.
SFRTV-5
ROPS Serial
No.
XXXXX
ROPS Gross Machine Weight
2314 lbs. (1050 kg)
ROPS meets requirements of
*OHSA Part 1928.52
*SAE J1124