Kubota R065, Operator'S Manual

Page: 45 / 117

17 CHECKS BEFORE START
C Coolant Temperature Gauge
To avoid personal injury or death:
A
Do not open the radiator cap during or just after
operation. Hot coolant may gush out and scald
you. Wait for the coolant to cool down before
opening the cap.
With the starter key at the "RUN" position, the cooling
water temperature is indicated.
C Hour-meter
Indicates the total operating hours of the machine.
How the indicator works
A
The meter advances one hour after an hour of
operation regardless of the engine rpm.
C Engine tachometer
Indicates the current rpm of the engine.
A
The LCD may be illegible when viewed from a certain
angle. This is not a display failure.
B
LCD for Warning
C Engine oil pressure warning indicator
The engine oil pressure warning indicator lights up due to
failure of the lubricating system with the engine running.
When the starter key is turned to
"RUN" position with the
engine off, this engine oil pressure warning indicator lights
up, warning indicator blinks and when the engine starts,
the indicators go out.
If the indicator stays on with the engine running, stop the
engine and check the engine oil level.
C Battery charge indicator
This battery charge indicator lights up if the charging
system fails with the engine running.
When the starter key is turned to
"RUN" position with the
engine off, the battery charge indicator lights up, warning
indicator blinks and when the engine starts, the indicators
go out.
If the indicator stays on with the engine running, stop the
engine and check the V-belt.
(1) Coolant temperature gauge (A) "HOT"
(B) "COOL"
(1) Engine oil pressure warning indicator
(2) Engine warning indicator (red)
(3) Warning message
(1) Battery charge indicator
(2) Engine warning indicator (red)
(3) Warning message