CHECKS BEFORE START
14
[Setting the hour]
Press user setting switch and the numeric setting will be
smaller.
Press display selector switch and the numeric setting will
be larger.
[Setting the minute]
Press user setting switch and the numeric setting will be
smaller.
Press display selector switch and the numeric setting will
be larger.
If display selector switch is pressed for a long time, the
new settings will be made.
A
If the battery is disconnected, the clock setting request
lamp " " (yellow) will blink for requesting the setting
the clock.
B
Battery Charge Indicator
This warning indicator lights up if the charging system fails
with the engine running. When the starter switch is turned
to
"RUN"
with the engine off, the indicator lights up, and
when the engine starts, the indicator goes out. If the
indicator stays on with the engine running, stop the engine
and check the fan belt.
A
If there is disconnection or failure in the charging
system when the key is turned to
"RUN"
, the following
symbol will appear.
User setting switch
Display selector switch
11
10
9
12
11
10
User setting switch
Display selector switch
50
49
48
52
51
50
(1) Glow plug indicator
(2) Battery charge indicator
(3) Engine oil pressure indicator
Summary of Contents for R065
