manualshive.com logo in svg

Kubota MX5200, Operator'S Manual, Page: 5 / 115

Share
Download
Kubota MX5200 Operator'S Manual Download Page 5

CONTENTS

SAFE OPERATION......................................................................................................................5

SERVICING OF THE TRACTOR ...............................................................................................15

DEALER SERVICE ............................................................................................................................................. 15

1. Warranty of the tractor ............................................................................................................................... 15
2. Scrapping the tractor and its procedure .................................................................................................... 16

SPECIFICATIONS......................................................................................................................17

SPECIFICATION TABLE..................................................................................................................................... 17
TRAVELING SPEEDS TABLE [MANUAL TRANSMISSION TYPE] ................................................................... 19
TRAVELING SPEEDS TABLE [HST TYPE]........................................................................................................ 20

IMPLEMENT LIMITATIONS.......................................................................................................21

IMPLEMENT LIMITATION TABLES .................................................................................................................... 21

INSTRUMENT PANEL AND CONTROLS .................................................................................23

INSTRUMENT PANEL, SWITCHES, AND HAND CONTROLS ......................................................................... 23

1. Head light switch ....................................................................................................................................... 24
2. Hazard light switch and turn signal light switch ......................................................................................... 24
3. Warning lamps........................................................................................................................................... 25
4. Key switch ................................................................................................................................................. 25
5. Horn button................................................................................................................................................ 26

FOOT CONTROLS AND HAND CONTROLS .................................................................................................... 27

1. Foot controls and hand controls [Manual transmission type] .................................................................... 27
2. Foot controls and hand controls [HST type] .............................................................................................. 28
3. Clutch pedal............................................................................................................................................... 29
4. Front wheel drive lever .............................................................................................................................. 29
5. Seat belt .................................................................................................................................................... 30
6. Operator's seat .......................................................................................................................................... 30
7. Hand throttle lever ..................................................................................................................................... 31
8. Brake pedals (right and left) ...................................................................................................................... 31

8.1 How to use the parking brake ............................................................................................................ 31

9. Main gear shift lever [Manual transmission type only]............................................................................... 32
10. Synchro-shuttle shift lever [Manual transmission type only].................................................................... 32
11. Range gear shift lever [Manual transmission type] .................................................................................. 32
12. Foot throttle [Manual transmission type only] .......................................................................................... 33
13. Range gear shift lever (L-M-H) [HST type] .............................................................................................. 33
14. Cruise control lever [HST type only] ........................................................................................................ 33

14.1 How to use the cruise control lever [HST type only] ........................................................................ 34

15. Speed control pedal [HST type only] ....................................................................................................... 34

ELECTRICAL OUTLET....................................................................................................................................... 35

PRE-OPERATION CHECK ........................................................................................................36

DAILY CHECK ITEMS BEFORE OPERATION OF THE TRACTOR .................................................................. 36

OPERATING THE ENGINE .......................................................................................................37

PRECAUTIONS FOR OPERATING THE ENGINE............................................................................................. 37
STARTING THE ENGINE [MANUAL TRANSMISSION TYPE] .......................................................................... 37
STARTING THE ENGINE [HST TYPE]............................................................................................................... 39
STARTING THE ENGINE IN COLD WEATHER ................................................................................................. 41

1. Block heater (if equipped).......................................................................................................................... 41

STOPPING THE ENGINE................................................................................................................................... 41
WARMING UP OF THE ENGINE ....................................................................................................................... 41

1. Warm-up of the engine and transmission oil in the low temperature range............................................... 42

JUMP STARTING THE ENGINE ........................................................................................................................ 42

MX5200

1

Summary of Contents for MX5200




















































































































Reviews:

No comments