Kubota MX5200, Operator'S Manual, Page: 38 / 115

• Do not use the cruise control when driving on
the road.
• Be sure to connect both the left and the right
brakes to release the cruise control. The speed-
cruise-control will not be released with single
brake activation.
Cruise control is designed for operating efficiency of the
tractor and operator comfort. Cruise-control-device will
provide a constant forward operating speed by
mechanically holding the cruise-control-lever at the
selected position.
NOTE :
• Cruise-control-device will not operate in
reverse.
• Preferably set the cruise-control-lever, while
holding down the speed-control-pedal. You can
set the cruise-control-lever smoothly.
• When releasing the cruise mode, be sure to
return the cruise-control-lever fully backward.
(1) Cruise control lever (A) Increase
(B) Decrease
(C) Neutral
14.1 How to use the cruise control lever
[HST type only]
(1) Cruise control lever
(2) Speed control pedal
(3) Brake pedal (A) Increase
(B) Decrease
(C) Neutral
To engage the cruise control device
The proper forward speed will be maintained if you
apply the cruise-control-lever at any position.
1. To operate faster than the set speed, depress the
speed-control-pedal further down in the proper
forward speed.
The set speed will be resumed if you release the
speed-control-pedal.
NOTE :
• When you stand up from the operator's seat
with the speed-control-pedal stepped on or the
cruise-control-lever engaged on, the engine will
stop regardless of whether the tractor is moving
or not.
The engine stop is because that the tractor is
equipped with the operator-presence-control-
system (OPC).
To disengage the cruise control device
1. Move the cruise-control-lever all the way back.
2. Move the cruise-control-lever to the
“NEUTRAL”
position to release the cruise control.
3. Depress both brake pedals.
4. Depress the speed-control-pedal in reverse.
NOTE :
• Cruise control will be disengaged automatically
when both brake pedals are depressed.
• Cruise-control-device does not disengage when
the individual right or left brake is applied.
15. Speed control pedal [HST type
only]
WARNING
To avoid personal injury or death:
• Do not operate the tractor if it moves on level
ground with foot off of the speed-control-pedal.
• Consult your local KUBOTA Dealer.
• Forward pedal
Depress the speed-control-pedal with the toe of
your right foot to move forward.
• Reverse pedal
Depress the speed-control-pedal with the heel of
your right foot to move backward.
INSTRUMENT PANEL AND CONTROLS FOOT CONTROLS AND HAND CONTROLS
34
MX5200