Kubota M96SDTM, Operator'S Manual

Page: 36 / 142

OPERATING THE ENGINE 14
C
Check Easy Checker(TM) Lamps:
1. When the key is turned "ON", lamps (2) (3) (4) should
come on. If trouble should occur at any location while
the engine is running, the indicator lamp
corresponding to that location comes on.
2. Suppose that the engine coolant temperature is not
high enough yet. The heater indicator (5) also comes
on when the key is turned "ON" to preheat the engine
and goes off automatically when preheat is completed.
Illumination time of indicator varies according to the
temperature of coolant
3. The PTO clutch indicator (1) comes on while PTO
clutch control lever is engaged "ON" and goes off
when disengaged "OFF" it.
4. The parking brake / Brake oil warning lamp (6) comes
on while parking brake is applied and goes off when it
is released.
A
Daily checks with the Easy Checker(TM) only, are not
sufficient. Never fail to conduct daily checks carefully
by referring to Daily Check.
(See "DAILY CHECK" in "PERIODIC SERVICE"
section.)
A
Because of the safety devices, the engine will not start
except when the PTO clutch control lever is placed in
the "OFF" position and main gear shift lever is placed
in the "NEUTRAL" position.
If a lamp is still on, immediately stop the engine and
determine the cause.
6. Insert the key into the key switch and
turn it "ON".
"OFF" "ON" "START"
(1) PTO clutch indicator
(2) Electrical charge indicator
(3) Engine oil pressure indicator
(4) Engine warning indicator
[M108S model] (5) Heater indicator
(6) Parking brake /
Brake oil indicator
7. Fully depress the clutch pedal.
8. Turn the key to "START" position and
release when the engine starts.
9. Check to see that all the lamps on the
Easy Checker(TM) are "OFF" .
10. Release the clutch pedal.