Kubota M7-132, Operator'S Manual

Page: 107 / 332

3. The engine rpm memory control (B) can also be
preset with the same procedure.
(1) Previous screen resume switch
(2) Engine rpm memory (B) control graph
(3) Engine rpm memory (A) control graph
(4) Plus (+) switch
(5) Minus (-) switch
(6) Engine rpm memory (A) switch
(7) Engine rpm memory (B) switch
(8) Engine rpm memory (A/B) indicator
11. Setting the headland
management system
This chapter describes how to record, save, load,
delete or modify the headland management system
program, as follows:
• Preparations for recording the program on page
101
• Recording the program through actual tractor
operation on page 102
• Pre-program lead time and pre-program travel
distance on page 102
• Saving the program on page 103
• Loading the program on page 104
• Deleting the program on page 105
• Modifying the program (lead time) on page 105
• Modifying the program (switching) on page 106
• Headland management system program list on
page 108
In addition, refer to the following section for, details
regarding the handling procedure of the headland
management system:
• HEADLAND MANAGEMENT SYSTEM on page
185
11.1 Preparations for recording the
program
The program consists of 2 different types of operation,
Field in and Field out, as listed in the following table.
Up to 20 programs can be saved and can be
overwritten any number of times.
Before recording this program, read the details
regarding the headland management system program
list to confirm programmable actions.
(See Setting the headland management system on
page 101.)
1. Touch the right half of the headland management
system lock/unlock switch to unlock the program. A
touch on the left half gets the program locked.
When the program is unlocked, the headland
management system lock indicator goes off.
K-MONITOR MAIN MENU ( PREMIUM AND PREMIUM KVT MODEL ONLY) INTELLIPANEL
™
CONTROL
M7132, M7152, M7172
101