Kubota M7-132, Operator'S Manual

Page: 111 / 332

4. Now the following screen appears.
a. Use the scroll switch (2) to select the slot (1) to
load the program.
b. Then touch the confirm switch (3).
(1) Slot
(2) Scroll switch
(3) Confirm switch
(4) Cancel switch
5. The “Load sequence. Are you sure?” message
appears.
• If the confirm switch (1) is touched, the program
will be loaded to the selected program code.
• If the cancel switch (2) is touched, the program
loading will be cancelled.
(1) Confirm switch
(2) Cancel switch
11.6 Deleting the program
1. Make sure the headland management system lock
indicator (8) is off.
2. Using the program select switch (2), choose the
program code to delete.
3. To delete the entire program, touch the delete
switch (3). The deleting can also be done by turning
on the record switch (7) first and then immediately
turning it off.
4. To delete part of the program, use the scroll switch
(5 or 6) to select the subcategory icon (10) to
delete. Then touch the delete switch (3).
(1) Headland management sys-
tem lock/unlock switch
(2) Program select switch
(3) Delete switch
(4) Edit switch
(5) Scroll switch (UP)
(6) Scroll switch (DOWN)
(7) Record switch
(8) Headland management sys-
tem lock indicator
(9) Program code indicator
(10) Subcategory icon
11.7 Modifying the program (lead time)
This section describes an example of modifying the
lead time for the PTO shaft to stop from the current 2-
second entry to a 5-second entry.
1. Make sure the headland management system lock
indicator (7) is off.
2. Using the program select switch (2), choose the
program code to modify.
K-MONITOR MAIN MENU ( PREMIUM AND PREMIUM KVT MODEL ONLY) INTELLIPANEL
™
CONTROL
M7132, M7152, M7172
105