Kubota M7-132, Operator'S Manual

Page: 112 / 332

3. Using the scroll switch (5 or 6) to select the PTO-
related subcategory icon (9) to modify. Then touch
the edit switch (4).
The following editing screen appears.
(1) Headland management sys-
tem lock/unlock switch
(2) Program select switch
(3) Delete switch
(4) Edit switch
(5) Scroll switch (UP)
(6) Scroll switch (DOWN)
(7) Headland management sys-
tem lock indicator
(8) Program code indicator
(9) PTO-related subcategory
icon
(10) Current lead time (2 sec-
onds)
4. On the editing screen, the PTO-related main
category icon (1) and subcategory icon (2), selected
in the previous step 3, are automatically displayed.
5. Using the appearing numeric keypad, enter a new
lead time (5 seconds in this example) and save the
entry.
NOTE :
• To change the lead time to the pre-program
distance, touch the distance and time select
switch (5). The lead time icon (7) changes to
the distance icon.
The steps hereafter are the same as for the
lead time setting.
6. Touch the confirm switch (3).
The “Change settings. Are you sure?” message
appears.
If the confirm switch (1) is touched, the program will
be modified and the previous screen will show up
again.
(1) PTO-related main category
icon
(2) Subcategory icon
(3) Confirm switch
(4) Cancel switch
(5) Distance and time select
switch
(6) Delete switch
(7) Lead time icon (timer)
(1) Confirm switch
(2) Cancel switch
11.8 Modifying the program (switching)
This section describes an example of switching
between the PTO program and differential lock program
1. Make sure the headland management system lock
indicator (7) is off.
2. Using the program select switch (2), choose the
program code to modify.
INTELLIPANEL
™
CONTROL K-MONITOR MAIN MENU ( PREMIUM AND PREMIUM KVT MODEL ONLY)
106
M7132, M7152, M7172