Kubota LA1154, Assembly Instructions Manual

Page: 22 / 63

ASSEMBLY INSTRUCTIONS 20
B
Self-Level Valve (if equipped)
1. Put the stud bolt in the valve stay support.
[M7998 (ROPS MODEL)]
[M7999 (CAB MODEL)]
2. Temporarily assemble the valve stay to the valve stay
support.
3. Attach the self-level valve assy to the valve stay.
(1) Valve stay support
(2) 3-M12 x 30 bolts
Tightening torque: See "TIGHTENING TORQUE OF
BOLTS AND NUTS" section
(3) 2-M10 Stud bolts
Tightening torque: 24.5 to 31.4 N-m
(2.5 to 3.2 kgf-m, 18.1 to 23.2 ft-lbs)
(1) Valve stay support
(2) 1-M12 x 25 bolt
Tightening torque: See "TIGHTENING TORQUE OF
BOLTS AND NUTS" section.
(3) 2-M12 x 35 bolts (original)
Tightening torque: See "TIGHTENING TORQUE OF
BOLTS AND NUTS" section.
(4) 2-M10 Stud bolts
Tightening torque: 24.5 to 31.4 N-m
(2.5 to 3.2 kgf-m, 18.1 to 23.2 ft-lbs)
(1) Valve stay
(2) 2-Stud bolts
(3) 2-M10 x 120 hex. bolts
Tightening torque: See "TIGHTENING TORQUE OF
BOLTS AND NUTS" section.
(4) 2-M10 spring lock washers
(5) 2-M10 plain washers
(1) Self-level valve assy
(2) 2-M10 nuts
2-M10 spring lock washers
Tightening torque: See "TIGHTENING TORQUE OF
BOLTS AND NUTS" section.
(3) M10 x 60 hex. bolt
Tightening torque: See "TIGHTENING TORQUE OF
BOLTS AND NUTS" section.