Kubota LA1154, Assembly Instructions Manual

Page: 15 / 63

13 ASSEMBLY INSTRUCTIONS
8. Connect the hoses between the connector assembly
stay and the valve.
A With all the hoses connected to the valve, be certain
that any of the hoses is out of close contact with the
other hoses, the fittings and edges.
A
If the above problem is found, correct the hoses to
remove their twist of loosen the nut shown in the figure
to readjust the fitting angle for avoiding such close
contact.
B
Controller and Cables
C
M7995 (ROPS MODEL), M7996 (CAB MODEL)
1. Remove the cover cap of the tractor.
[M7995 (ROPS MODEL), M7996 (CAB MODEL)]
(1) Hydraulic hose (Red 500 mm (19.7 in.), 3/4-UNF)
Tightening torque: See "TIGHTENING TORQUE OF
ADAPTORS, ELBOWS AND OTHERS" section.
(2) Hydraulic hose (Blue 597 mm (23.5 in.), 3/4-UNF)
Tightening torque: See "TIGHTENING TORQUE OF
ADAPTORS, ELBOWS AND OTHERS" section.
(3) Hydraulic hose (Yellow 465 mm (18.3 in.), 3/4-UNF)
Tightening torque: See "TIGHTENING TORQUE OF
ADAPTORS, ELBOWS AND OTHERS" section.
(4) Hydraulic hose (White 559 mm (22.0 in.), 3/4-UNF)
Tightening torque: See "TIGHTENING TORQUE OF
ADAPTORS, ELBOWS AND OTHERS" section.
[LA1154SU]
(1) Hydraulic hose (Red 500 mm (19.7 in.), 3/4-UNF)
Tightening torque: See "TIGHTENING TORQUE OF
ADAPTORS, ELBOWS AND OTHERS" section.
(2) Hydraulic hose (Blue 560 mm (22.0 in.), 3/4-UNF)
Tightening torque: See "TIGHTENING TORQUE OF
ADAPTORS, ELBOWS AND OTHERS" section.
(3) Hydraulic hose (Yellow 465 mm (18.3 in.), 3/4-UNF)
Tightening torque: See "TIGHTENING TORQUE OF
ADAPTORS, ELBOWS AND OTHERS" section.
(4) Hydraulic hose (White 510 mm (20.1 in.), 3/4-UNF)
(1) Fitting
(2) Nut
Tightening torque: 48.0 to 54.0 N-m
(4.9 to 5.5 kgf-m, 35.0 to 40.0 ft-lbs)
(1) Cover cap