Kubota KX080-4S, Operator'S Manual

Page: 45 / 142

21 CHECKS BEFORE START
ECO MODE
In the ECO mode, the jobs can be carried on with better
fuel efficiency than in the standard mode. The engine is
revved only up to the medium speed in the ECO mode.
Press the top of the ECO mode switch, and the ECO
mode switch lamp lights up and the machine comes in the
ECO mode. Press its bottom, and the above lamp goes
out and the machine comes back in the standard mode.
When the machine operates in the ECO mode, the ECO
mode mark appears on the LCD screen as shown in the
following figure.
CAB TYPE MACHINES
B
Wiper/Washer Switch
To engage the wiper, turn on the switch for the wiper when
the starter key is in the "RUN" position. A further push on
the switch will activate the washer system. Even when the
wiper switch is in the "OFF" position, the washer switch
functions if it is pressed.
A
Do not activate the washer switch if the tank for the
cleaning fluid is empty; the pump can be damaged.
A
Do not activate the wiper switch if the window is dry. In
this case, make sure that cleaning fluid is applied to
the pane before activating the wiper.
A
In frosty conditions, make sure that the wiper blade is
not frozen to the glass before switching-on. The motor
can be damaged if the wiper system is used under
such conditions.
B
Interior Lamp
To turn on the interior lamp, set the interior lamp switch to
the "ON" positions.
(1) ECO mode switch
(1) ECO mode mark
(1) Wiper switch
(1) Interior lamp
(2) Interior lamp switch (A) "ON"
(B) "OFF"