Kubota KX080-3, Operator'S Manual

Page: 40 / 115

OPERATION OF THE ENGINE 18
B
Warning Lamp
The warning lamp is used to indicate broken wire, short-
circuit, fuel shortage and other problems.
The warning lamp starts flashing in red if any trouble
occurs. If the system gets in warning signal, the warning
lamp starts flashing in yellow.
A
Do not just look at the meter, but also carry out the
inspection and correction accordingly.
A
The warning lamp starts flashing in red if a serious
problem occurs. If the system gets in warning signal,
the warning lamp starts flashing in yellow.
A
Warnings and errors are displayed and an alarm
buzzer beeps.
A
Let your KUBOTA dealer inform you of details
concerning care and maintenance.
B
Fuel Supply Pump
To avoid serious injury or death:
A
Do not use the fuel supply pump for gasoline or
hydraulic oil. Doing so could result in
explosion or damage. Only use the fuel supply
pump for diesel fuel.
To avoid personal injury:
A
When the fuel supply pump is used, be sure to
open the fuel tank cap.
A
Stop the engine and remove the key before
fuelling.
A
Do not smoke while fuelling.
This device automatically supplies fuel to the fuel tank and
stops automatically when the fuel tank is full.
1. Open the tank cover. (See "Opening / Closing of the
Fuel Tank Cover" in "MAINTENANCE" section.)
2. Open the fuel tank cap (1).
3. Insert the pump's nozzle (2) in the fuel supply tank.
4. Push the switch (black button (3)). The pump stops
automatically once the fuel tank is full. To stop the
pump on the way, the switch (red button (4)) is pushed.
(1) Warning lamp (red, yellow)
(2) LCD display
(1) Fuel tank cap