manualshive.com logo in svg

Kubota KUBOTA RTV-XG850, Operator'S Manual

Share
Download
Kubota KUBOTA RTV-XG850 Operator'S Manual Download Page 9

SAFE OPERATION

Careful  operation  is  your  best  insurance  against  an
accident.
Read  and  understand  this  operator's  manual  carefully
before operating the vehicle.
All  operators,  no  matter  how  much  experience  they
may have, should read this and other related manuals
before operating the vehicle or any implement attached
to it. It is the owner's obligation to instruct all operators
in safe operation.

BEFORE OPERATING THE

VEHICLE

Know  your  equipment  and  its  limitations.  Read  this
entire  manual  before  attempting  to  start  and  operate
the vehicle.

1. General

• Pay  special  attention  to  the  safety  labels  on  the

vehicle.

• Do  not  use  a  modified  ROPS.  Do  not  remove  roll-

over  protective  structures  (ROPS)  for  any
application  and  fasten  seat  belts  at  all  times.  This
combination will reduce the risk of serious injury or
death, should the vehicle be upset.
If the ROPS is loosened or removed for any reason,
make  sure  that  all  parts  are  reinstalled  correctly
before operating the vehicle.
Never  modify  or  repair  a  ROPS  because  welding,
bending,  drilling,  grinding,  or  cutting  may  weaken
the structure.
If any structural member of the ROPS is damaged,
replace  the  entire  structure  at  your  local  KUBOTA
Dealer.

• Do not remove the side door or the side retention.

(1) ROPS
(2) Seat belt
(3) Handhold
(4) Side door
(5) Side retention

(A) Passenger

• Always  use  the  seat  belts.  Check  the  seat  belts

regularly and replace if frayed or damaged.

• Do  not  operate  the  vehicle  or  any  implement

attached  to  it  while  under  the  influence  of  alcohol,
medication, controlled substances or while fatigued.

• Carefully  check  the  vicinity  before  operating  the

vehicle  or  any  implement  attached  to  it.  Check  for
overhead  clearance  which  may  interfere  with  the
CAB or ROPS. Do not allow any bystanders around
or near the vehicle during operation.

• Never allow anyone under age 16 or without a valid

driver's license to operate this vehicle.

• Before  allowing  other  people  to  use  your  vehicle,

explain  how  to  operate  and  have  them  read  this
manual before operation.

• Never wear loose, torn, or bulky clothing around the

vehicle.  It  may  catch  on  moving  parts  or  controls,
leading  to  the  risk  of  an  accident.  Use  additional
safety  items,  e.g.  helmet,  safety  boots  or  shoes,
eye  and  hearing  protection,  gloves,  etc.,  as
appropriate or required.

• This vehicle is for off-highway use only.

KUBOTA does not recommend operating on public
roads.

• In  addition  to  the  driver,  only  1  passenger  should

ride in the vehicle.
Do  not  allow  children  to  ride  in  the  passenger's
seat.
Do not carry small children on lap.
Passenger must be able to grasp the handhold with
seat belt on and both feet on floor.

• Keep  all  shields  in  place  and  stay  away  from  all

moving parts.

SAFE OPERATION

RTV-XG850

5

Summary of Contents for KUBOTA RTV-XG850




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands