Kubota KUBOTA RTV-XG850, Operator'S Manual

Page: 67 / 99

Cargo load
condition
Tire
Inflation pres-
sure
0 to less than
550 lbs. (0 to
less than
250 kg)
25 x 10 - 12
HDWS ATV
Front
120 kPa
1.2 kgf/cm
2
17 psi
Rear
120 kPa
1.2 kgf/cm
2
17 psi
550 lbs or more
(250 kg or more) 25 x 10 - 12
HDWS ATV
Front
120 kPa
1.2 kgf/cm
2
17 psi
Rear
170 kPa
1.7 kgf/cm
2
24 psi
(1) Ground
(A) “INSUFFICIENT” (B) “NORMAL”
(C) “EXCESSIVE”
17. Checking tire
1. Check to see if tires are not damaged.
2. If the tires are cracked, bulged, or cut, or they are
worn out, replace or repair them at once.
Tire tread depth
Always replace the tires when the tread depth is
worn to minimum allowable(A).
(A) Minimum allowable tread depth 5 mm (0.2 in.)
EVERY 50 HOURS OR 1500 KM
Be sure to do the following servicing once every 50
hours or 1500 km, whichever comes first.
1. Checking engine start system
WARNING
To avoid serious injury or death:
• Do not allow anyone near the vehicle while
testing.
• If the vehicle does not pass the test, do not
operate the vehicle.
Preparation before testing.
1. Place all control levers in the “NEUTRAL” position.
2. Set the parking brake and stop the engine.
Test: Range gear shift lever safety switch
1. Sit on the operator's seat.
2. Shift the range gear shift lever to
[H] position.
3. Return the speed control pedal to the “NEUTRAL”
position.
4. Turn the key to “START” position.
5. The engine must not crank.
6. Repeat the step 2 to 5 with the range gear shift
lever at [L] and [R] each position.
7. If it cranks, consult your local KUBOTA Dealer for
service.
(1) Range gear shift lever (2) Speed control pedal
2. Greasing
Apply a small amount of multi-purpose grease to the
following points every 50 hours: If you operate the
vehicle in extremely wet and muddy conditions,
lubricate grease fittings daily.
DAILY CHECK PERIODIC SERVICE
RTV-XG850
63