Kubota CTL SVL97-2, Operator'S Manual

Page: 108 / 158

14. Checking the pre-cleaner
1. Check to see if the clamp is loose.
If loose, retighten it up.
2. Check the appearance of the pre-cleaner for
noticeable damage or cracks.
In such a case, replace the pre-cleaner with new
one.
3. Check to see if the pre-cleaner's suction and
discharge ports are blocked with foreign matters.
If so, remove such matters.
4. Check around the pre-cleaner for sand, mud, dust,
snow and such deposits.
Remove them as required.
(1) Pre-cleaner
(2) Clamp (A) Suction port
(B) Discharge port
15. Checking the DPF (diesel-
particulate-filter) muffler
WARNING
To avoid personal injury or death:
• Before checking or cleaning the DPF muffler,
stop the engine and wait long enough until it is
cooled down.
1. Check to see if flammable material is deposited
around the DPF muffler.
If so, clean it out, otherwise a fire may result.
(1) DPF muffler
16. Checking the washer liquid
[Closed cab model]
If the window washer is switched on with the washer
liquid tank empty, the motor may be damaged. Always
keep the tank filled.
(1) Washer liquid tank
IMPORTANT :
• The washer-liquid-tank should be half filled
before working on a slope or a rough ground,
otherwise the liquid may leak out when the
machine bounces.
Half filled of the washer-liquid-tank about 0.8 liter
17. Checking the battery condition
DANGER
To avoid the possibility of a battery explosion: For
refillable type battery, follow the following
instructions.
• Do not use or charge the refillable type battery
if the fluid level is below the [LOWER] (lower
limit level) mark. Otherwise, the component
parts
of the battery may prematurely
MAINTENANCE DAILY CHECKS
102
SVL97-2