Kubota BX1880 Operator'S Manual Download

Page: 54 / 114

4. Lower the implement to the ground.

(1) Hydraulic control lever
(A) Lowered
(B) Neutral position

(C) Raised

5. Shift the range-gear-shift-lever to the neutral

[N]

position.

(1) Range gear shift lever (Hi-

Lo)

(A) Low

(B) Neutral position
(C) High

6. Set the parking brake.

(See

To set the parking brake

in How to use the

parking brake on page 34)

(1) Brake pedal
(2) Parking brake lock pedal
(A) Depress

(B) Push down the parking

brake lock pedal while de-
pressing the brake pedal

CHECK DURING DRIVING

1. Cases to stop the engine

immediately

Immediately stop the engine if:

• The engine suddenly slows down or accelerates.
• Unusual noises suddenly are heard.
• Exhaust fumes suddenly become very dark.

2. Check items during driving

While driving the tractor, check the following items to
see that all the parts are functioning normally.

(1) Easy Checker

™

(2) Fuel gauge
(3) Coolant temperature gauge

(4) Hour meter
(5) Tachometer

•

Easy Checker

™

(See Easy Checker

™

on page 50)

•

Fuel gauge

(See Fuel gauge on page 51)

•

Coolant temperature gauge

(See Coolant temperature gauge on page 51)

•

Hour meter

(See Hour meter on page 52)

•

Tachometer

(See Tachometer on page 52)

2.1 Easy Checker

™

If trouble should occur at any location while the engine
is running, the warning-indicator-lamp in the Easy
Checker

™

corresponding to that location comes on.

If the warning-indicator-lamps in the Easy Checker

™

come  on  during  operation  of  the  tractor,  immediately
stop  the  engine,  and  find  the  cause  as  the  following
table.
Never  operate  the  tractor  while  the  warning-indicator-
lamp in the Easy Checker

™

is on.

NOTE :

• For checking and servicing of your tractor,

consult your local KUBOTA Dealer for
instructions.

OPERATING THE TRACTOR

CHECK DURING DRIVING

BX1880,BX2380,BX2680

Summary of Contents for BX1880



















































































































Search results

Summary of Contents for BX1880

Reviews:

Related manuals for BX1880

Brands by name

Popular brands

Kubota BX1880, Operator'S Manual

Search results

Summary of Contents for BX1880

Reviews:

Related manuals for BX1880

Brands by name

Popular brands