Kubota B2630, Operator'S Manual

Page: 51 / 100

31 PTO
B
Stationary PTO
To park the tractor and use the PTO system (for chipper
or pump, for example), start the PTO system in the
following steps.
1. Apply the parking brakes and place blocks at the tires.
2. Make sure the shift levers are at NEUTRAL, and start
the engine .
3. Set the PTO select lever to rear only position.
4. Dismount the seat and tilt up.
5. Set the PTO clutch lever to engage "ON".
6. Set the engine speed to provide recommended rear
PTO speed.
A If the PTO clutch lever is shifted to "ON"(Engaged)
position under the following condition, the engine will
stop itself.
(1) The range gear shift lever (H-M-L) is not at
"NEUTRAL" position.
(2) The PTO select lever is not at "REAR PTO"
position.
(3) The seat is not tilted forward.
(1) Seat
(2) PTO clutch lever
(3) PTO select lever "ON"
"OFF"