Kubota B2320, Operator'S Manual, Page: 78 / 88

PERIODIC SERVICE 62
B
Changing Engine Oil
To avoid personal injury:
A
Be sure to stop the engine and remove the key
before changing the oil.
A
Allow engine to cool down sufficiently, oil can
be hot and can burn.
1. To drain the used oil, remove the drain plug at the
bottom of the engine and drain the oil completely into
the oil pan.
All the used oil can be drained out easily when the
engine is still warm.
2. After draining reinstall the drain plug.
3. Fill with the new oil up to the upper notch on the
dipstick.
(See "LUBRICANTS" in "MAINTENANCE" section.)
4. Properly dispose of used oil.
Oil capacity with filter
B2320
B2620
3.1 L (3.3 U.S.qts.)
B2920 3.5 L (3.7 U.S.qts.)
(1) Oil inlet
(1) Dipstick (A) Oil level is acceptable within this range
(1) Drain plugs