Kubota B2320, Operator'S Manual, Page: 51 / 88

35 HYDRAULIC UNIT
B
Implement Lowering Limit
[Except B2320DTN, B2320HSDN]
The implement lowering limit can be changed by shifting
the locker (A).
Lower Limit
The lower limit can be changed by adjusting the position
of locker (A). Shifting the locker (A) backward raises the
lower limit and shifting it forward lowers the lower limit.
B
3-point Hitch Lowering Speed
To avoid personal injury:
A
Fast lowering speed may cause damage or
injury. Lowering speed of implement should be
adjusted to two or more seconds.
The lowering speed of the 3-point hitch can be controlled
by adjusting the 3-point hitch lowering speed knob.
AUXILIARY HYDRAULICS
Hydraulic outlet is provided on the tractor.
(without loader valve only)
B
Hydraulic Block Type Outlet
Hydraulic block type outlet is useful when adding
hydraulically operated equipment such as front end
loader, front blade, etc.
When implement is attached
1. Remove the block cover.
2. Attach the block outlet cover. (option)
[B2320DT]
A For hydraulic block type outlet, be sure to use the
control valve of the "Power beyond type" with relief
valve that has a third line return to tank for the
operation of hydraulic block.
(1) Interlock rod
(2) Locker (A) (3) Nuts
(4) Spring
(1) 3-point hitch lowering speed knob (A) "FAST"
(B) "SLOW"
(C) "LOCK"
(1) Block cover
(2) Block outlet cover (option)
(3) Outlet
(4) Inlet
(5) Hydraulic block (A) From gear pump
(B) To implement inlet
Max. flow
17.9 L/min
(4.7 U.S.gals./min)
No relief valve in the
hydraulic block.
(C) From implement outlet