Section 4: Optional Equipment
12/18/19
AP-SC2560 & AP-SC2572 Skid Steer Rotary Cutter 326-836MK
28
Front Mounted Gauge Wheel
Refer to Figure 4-1:
Gauge Wheel Assembly326-004A
The Front mounted gauge wheel will aid in floating the
cutter over uneven terrain making the operator’s job
easier and helps protect against running the cutter frame
into the ground.
Section 4: Optional Equipment
Skid Shoe Bundles
Refer to Figure 4-2:
Standard Skid Shoe Bundle326-827A
Heavy Skid Shoe Bundle326-828A
There are two skid shoe bundles available. The standard
skid shoe bundle is constructed of 1/4" x 2" flat bar and
the heavy skid shoe bundle is constructed of 3/8" x 3" flat
bar. The heavy skid shoes will wear longer and withstand
more abuse.
Motor and Hose Assembly
Refer to Figure 4-3:
11-17 GPM Motor Assembly326-820A
18-23 GPM Motor Assembly326-821A
24-30 GPM Motor Assembly326-822A
SC2560 Hose Assy326-826L
SC2572 Hose Assy326-834L
There are three motor and two hose assembly options to
meet your skid steer requirements. All assemblies are
interchangeable and do not require adapter kits.
Compare your motor’s hydraulic flow rating located on an
attached decal with the motor ratings above:
If your cutter’s motor and hose assembly is not
compatible with your skid steer, you should replace it with
one of the following assemblies:
Gauge Wheel Assembly
Figure 4-1
Skid Shoe Bundle
Figure 4-2
Motor and Hose Assembly
Figure 4-3
24549
37944
24587
