Introduction
12/18/19
AP-SC2560 & AP-SC2572 Skid Steer Rotary Cutter 326-836MK
10
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
•
Store your Operator’s manual in the dry storage tube
for future reference. See Figure 1 on page 11 for
location of storage tube.
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Kubota/Land Pride and should only be
replaced with genuine Kubota parts. Contact a Kubota
dealer if customer service or repair parts are required.
Your Kubota dealer has trained personnel, repair parts,
and equipment needed to service the attachment.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Kubota dealer. For location of
your serial number plate, see Figure 1.
IMPORTANT:
A special point of information related
to the following topic. Kubota’s intention is that this
information must be read and noted before
continuing.
NOTE:
A special point of information that the
operator should be aware of before continuing.
Introduction
Kubota welcomes you to the growing family of new
product owners. This Rotary Cutter has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this attachment.
Application
The SC2560 and SC2572 Series Skid Steer Rotary
Cutters are built and designed by Kubota for cutting on
gently sloping or slightly contoured right-of-ways,
pastures, set aside acres, and row crop fields. These skid
steer mounted cutters provide unparalleled access to
tightly restricted areas such as under fences, in and
around boxed in corner sections of corrals and out
buildings, vineyard, nursery rows, wooded lots, and
approaches to ditches and waterways. The 60" or 72"
cutting width, 8"offset capability to the right, 2" cutting
capacity, 1.5" to 18" cutting height range, and the
universal skid steer floating-hitch mounting plate make
the SC2560 and SC2572 highly versatile and easy to
use. The SC2560 and SC2572 are compatible with and
designed for attachment to skid steers having 1500 psi to
3500 psi operating pressure and flow rates in the 11-17
gpm, 18-23 gpm, or 24-30 gpm ranges.
The SC2560 and SC2572 are equipped with two 1/2" x
4"updraft blades and a heavy duty round pan stump
jumper. A deflector chute is located to the left rear side of
the cutter to prevent clogging in heavy cutting conditions.
The SC2560 and SC2572 come standard with a front
mounted single row chain guard, a rear mounted double
row chain guard, and a safety chain to restrict deck lift
height. Four corner-mounted skid shoes are provided to
reduce wear and to keep the cutter from bottoming out. A
Lexan protective cab door is available as optional
equipment or owner/operators may choose to use a
protective door provided or made available by their skid
steer supplier/manufacturer.
A pivoting and adjustable front mounted gauge wheel
with a single laminated tire is available to make mowing
even easier by pre-setting the mowing height and
allowing the cutter to float over uneven terrain. Hydraulic
hoses and a case-drain line are provided as standard
equipment but compatible couplers for attachment to the
individual skid steers auxiliary hydraulic outlets will need
to be provided by dealers or customers.
The addition of a Kubota SC2560 or SC2572 Skid Steer
Rotary Cutter to your arsenal of skid steer attachments
will dramatically increase the versatility and value of your
personal skid steer investment.
See
“Specifications & Capacities”
on page 36 and
“Features & Benefits”
on page 38 for additional
information and performance enhancing options.
