F-3818
3 of 6
8-20-2004
2-7277
INSTALLING LIFT CYLINDERS
1. Install grease fittings (19), into threaded holes in base
and rod ends of lift cylinders (18). Install grease
fittings (19) so they are opposite cylinder ports.
WARNING:
Be sure to support loader
using an overhead hoist. Installed lift
cylinders will not support loader in upright
position. Boom may fall causing serious
personal injury.
2. Loop nylon strap around center of boom cross
member. Using overhead hoist to support loader,
temporarily remove cap screws and pins which
secure shipping braces.
3. Install lift cylinders (18), with base end connected to
boom arm and hydraulic ports toward boom arm,
using hardware removed earlier when shipping
braces were removed.
NOTE:
Pin rod ends of cylinders into loader uprights
first, then pin base end to loader boom arms.
Refer to the following illustration for an explanation of
cylinder rod attachment options.
4. One hose at a time, to avoid error when reconnecting,
disconnect lift cylinder hoses from loader boom oil
lines, connect to lift cylinders, and then reconnect to
loader boom oil lines.
NOTE:
Lift cylinder hoses must be free to rotate while
being connected to lift cylinder ports.
PARTS LIST - MOUNTING KIT
Item
Part No.
Description
Qty.
1
50900
BRACKET, Front Mounting
1
2
51322
BRACKET, Mid Mounting, Left
1
3
51323
BRACKET, Mid Mounting, Right
1
4
51244
YOKE, with Decals
1
5
48808
PLATE, Light adapter
2
6
42672-66
SCREW, Cap, 16mm-1.50 x 45mm
18
7
42672-23
SCREW, Cap, 14mm-1.50 x 40mm
4
8
41837-7
WASHER, Lock, 5/8"
18
9
42502-12
WASHER, Flat, 5/8"
18
10
41837-6
WASHER, Lock, 9/16"
4
11
41838-27
SCREW, Cap, 5/8-11 x 2"
4
12
41840-7
NUT, Lock, 5/8-11
4
13
41838-7
SCREW, Cap, 3/4-10 x 2-1/2"
4
14
41840-8
NUT, Lock, 3/4-10
4
15
41838-20
SCREW, Cap, 1/4-20 x 3/4"
4
16
42502-6
WASHER, Flat, 1/4"
4
17
41840-11
NUT, Lock, 1/4-20
4
18
43218
CYLINDER, Lift, 2-3/4" nominal O.D.
2
19
6075-4
FITTING, Grease, 1/4-28 Straight
4
20
39240
DECAL, Do not tow ...
2
Loader Upright
Refer to operator’s manual
for specifications in each
cylinder mounting position.
Decreases lift capacity while
increasing lift height by 12"
Nylon Strap
Remove cap screws
and pins, which
secure shipping braces.
