SAFETY PRECAUTIONS - continued
OM 0427SB-A
[8]
20.
Never allow anyone near the work area.
21.
Never allow anyone to operate the
snowblower until they have read the
manual completely and are thoroughly
familiar with basic tractor and snowblower
operation.
22.
Make sure the tractor is counterweighted
as recommended by the operator manual
for the tractor. Weights provide the
necessary balance to improve stability,
traction and steering.
23.
Always
make
sure
all
snowblower
components are properly installed and
securely fastened BEFORE operation.
24.
Adjust housing height to clear gravel or
crushed rocks surface.
25.
Keep away from chute discharge. This
chute has the capacity to throw debris at
far distances.
26.
Never direct chute discharge towards
people or animals. A thrown debris can
cause serious injury.
T
RANSPORTATION
1.
If the tractor/snowblower is to be driven on
public roads, it must be equipped with an SMV
(Slow Moving Vehicle) sign. Check local traffic
codes that may apply to unit usage on public
roads and highways in your area.
2.
Check local traffic codes that may apply to unit
usage on public roads and highways in your
area. The use of flashing amber lights is
acceptable in most localities. However, some
localities may prohibit their use.
3.
Always disengage the snowblower before
transport.
S
TORAGE
Before storing the snowblower, certain precautions
should be taken to protect it from deterioration.
1.
Clean the snowblower thoroughly.
2.
Make all the necessary repairs.
3.
Replace all Safety Signs that are damaged, lost,
or otherwise become illegible. If a part to be
replaced has a sign on it, obtain a new safety
sign from your dealer and install it in the same
place as on the removed part.
4.
Repaint all parts from which paint has worn or
peeled.
5.
Perform maintenance of the subframe and
snowblower as instructed under
"Maintenance"
section.
6.
When the snowblower is dry, oil all moving parts.
Apply oil liberally to all surfaces to protect against
rust.
7.
Store in a dry place.
8.
If snowblower has hydraulic components, install
protective plugs and caps on the quick couplers.
Summary of Contents for 21400001
