10
www.kuebler.com
Where negative values are permitted, the highest
digit will switch from “9” to”–” and only then to
“0”.
Press the
key to switch to the next digit.
Enter value: Press the
key, the value
will be stored. The next menu item
appears.
5.2 Input Parameters for Instantaneous value
All set-ups related to the input signal and the
corresponding displayed value are carried out
here.
The displayed value is displayed from the input
signal via the scaling slope.
5.2.1 Select range for the input signal
Menu <–> Selection
Display range
(–0,500 ... 10,500)
2 ... 10 V
(01,500 ... 10,500)
-10 ... +10 V
(–10,500 ... 10,500)
0 ... 20 mA
(–01,000 ... 21,000)
4 ... 20 mA
(03,000 ... 21,000)
0 ... 10 V
(–0,500 ... 10,500)
5.2.2 Set the decimal point for the Instantaneous value
Menu <–> Selection
Range
–19999 ... 99999
0,0
–1999,9 ... 9999,9
0,00
–199,99 ... 999,99
0,000
–19,999 ... 99,999
0,0000
–1,9999 ... 9,9999
The position of the decimal
point has no influence on the
measuring accuracy. The
maximum display value must
be within the display range.
After the decimal point is set
up, the leading zeros in the
display will be suppressed.
press the
key to accept the selection
press the
key to accept the selection
