Manual
Limes LA10 / BA1
Absolute Magnetic Length Measurement System
6. Installation and First Start-Up
CAUTION!
Please read the operating manual carefully before using the device! Strictly
observe the Installation instructions! In case of damage caused by failure to
observe this operating manual, the warranty expires.
Kübler is not liable for any secondary damage and for damage to persons,
property or assets.
The operator is obliged to take appropriate safety measures. The first start-up
may only be performed by staff that has been trained and authorized by the
operator.
6.1 Operating Area
WARNING!
Do not use the device in explosive or corrosive environments! The device
must not be installed close to sources of strong inductive or capacitive inter-
ference or strong electrostatic fields!
CAUTION!
The electrical connections must be made by suitably qualified personnel in
accordance with local regulations.
The device may be designed for switchboard mounting. During work on the
switchboard, all components must be de-energized if there is a danger of
touching the energized parts! (protection against contacts)
Wiring works may only be performed in the de-energized state!
Thin cable strands have to be equipped with end sleeves!
Before switching on the device, connections and plug connectors have to be
checked!
The device must be mounted in a way that it is protected against harmful
environmental influences such as splashing water, solvents, vibration, shock
and severe pollution and the operating temperature must not be exceeded.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]