18
OWNER’S MANUAL
TO DISASSEMBLE OR ADJUST ANY OF THESE COMPONENTS
. Doing so may cause extensive
damage to these components, will void your warranty, and may result in danger to persons and/
or property. If you cannot resolve any problem using this owner’s manual, contact your KUBERG
authorized dealer, or call the KUBERG Customer Service for assistance.
FRONT WHEEL REMOVAL AND INSTALLATION
1
Make sure the power is switched off.
2
Lift the bike onto a block or stand so that both wheels are off the ground.
3
Loosen the axle bolts and lower the wheel away from the front forks.
4
To re-install the wheel, reverse the above procedure and ensure the wheel is aligned cor-
rectly and the axle bolts are tight.
5
Spin the wheel to ensure it is centered and spins freely.
REAR WHEEL REMOVAL AND INSTALLATION
1
Make sure power is switched off.
2
Lift the bike onto a block or stand so the wheels are off the ground.
3
Remove the chain-tensioner by removing the main bolt.
4
Loosen the axle bolts.
5
Loosen the chain adjustment nuts to the point where the wheel can be pushed forward,
and the chain slipped off to the right of the sprockets.
6
Pull back on the wheel to remove it.
7
To re-install the wheel, reverse the above procedure and ensure the wheel is aligned cor-
rectly and the axle bolts are tight.
Summary of Contents for Freerider 2016
Page 1: ...OWNER S MANUAL 2016 FREERIDER ENGLISH ...
Page 2: ...2 OWNER S MANUAL ...
Page 15: ...15 OWNER S MANUAL ...