Kuberg Freerider 2016, Owner'S Manual

Page: 13 / 32

13
OWNER’S MANUAL
WARNING!
There are no user serviceable elements incorporated into the motor, motor controller, batteries,
battery charger, throttle, or wiring harness of your KUBERG electric bike. DO NOT ATTEMPT TO
DISASSEMBLE OR ADJUST ANY OF THESE COMPONENTS. Doing so may cause extensive damage
to these components, will void your warranty, and may result in danger to persons and/or proper-
ty. If you cannot resolve any problem using this owner’s manual, contact your KUBERG authorized
dealer, or call the KUBERG Customer Service for assistance.
BREAK-IN PERIOD
To assure future reliability and top-notch performance of your Kuberg Freerider, please, pay extra
attention during your first 50 km/30 miles (three full-charge cycles).
Avoid full-throttle starts and accelerate gradually.
Avoid hard braking. New brakes need some time to break in with moderate use for the first
50 km/30 miles or three full charges.
MOTORCYCLE CONTROLS
MAGNETIC KILL SWITCH
Magnetic kill switch is located on the left hand side of the handlebars. Always switch the bike into
the OFF position when stopped or parked.
WARNING!
If the power is turned on and the throttle is open, the bike will accelerate immediately. This is
potentially very dangerous. The rider’s right hand should be used to switch the power on, with no
hands on the throttle.
SPEED & TORQUE CONTROL BUTTON
The speed & torque control button allows a responsible adult to set bike’s maximum power and
torque. There are three distinct power & torque modes. Go to page xxx to read detailed instruc-
tions concerning how to set the various power & torque modes. Do not attempt to guess or
assume these settings. Always check them before allowing the rider back on the bike.