KTS-Electronic GmbH & Co. KG
– GPA 500
17
5 Data recordings
5.1 Modulation before data recording
Before data acquisition various settings must be carried out. The track length defines
– together with the values per track – the distance (see field
step width
) between
every single measurement. The values per track are limited to 100 maximum.
After pressing the [Start] button the measurement is activated; this can be carried out
either manual or time-controlled (standard setting is 0.2 sec). With the [Cancel]
button a program termination is given at all times. The switch between consensual
and contrasensual movement is also possible.
5.1.1 Display during data recording
During data recording the display turns up two-dimensional and in colored grading.
Of course, the shown colors are dependend on the selected modulation. The end of
a track is displayed, after confirmation the new track will be measured. A storage
request appears at the end of the last track; afterwards a switch to the three-
dimensional representation takes place.
