KTR-STOP® TB Thruster
acc. to DIN 15430
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
44414 EN
7 of 17
4
Please observe protection
note ISO 16016.
Drawn:
2020-11-02 Shg/Mro
Replacing:
KTR-N dated 2020-04-08
Verified:
2020-11-02 Shg
Replaced by:
Please pay attention to the following safety instructions before mounting and start-up of the thruster:
1. The thruster may solely be used in accordance with the application and mode of mounting specified
hereafter in the order or order confirmation.
2. Before assembly and initial start-up the user has to check if the entire thruster unit is in perfect
condition.
3. If the mounting dimensions specified cannot be adhered to, please consult with KTR before assembly.
4. The limit switches on the thruster are set by the manufacturing company and their function has to be
checked before delivery. The setting of the limit switches by the manufacturer must not be modified
without prior agreement by the manufacturer.
5. Make sure to keep the operation area free from any obstacles.
!
Leakages endanger the perfect or general operation of the thruster. Find out the reason and
take the necessary actions for repair. Close down the entire unit, if necessary.
Upon receipt of delivery inspect the consignment for completeness and potential transport damage.
Any missing components and damages should be announced to the manufacturer or sender of the
goods by return.
The thrusters can be stored in horizontal or upright position. During storage they should be protected
against weather effects, though they are generally intended for outside use. With a longer storage
period please consider that the seals may lose their elasticity which may affect their operation.
!
In order to avoid any injuries and any kind of damage please always make use of proper
transport and lifting equipment.
The thruster is packed differently each depending on number and kind of transport. Unless
otherwise contractually agreed, packaging will follow the in-house packaging specifications of KTR.
2
Advice
2.5 Special safety instructions
3
Storage, transport and packaging
3.1 Storage
3.2 Transport and packaging
