KTM RC 390 2020 Page 161 Owner'S Manual Download

Page: 161 / 263

WHEELS, TIRES 15

159

Info

Do not actuate the hand brake lever when the front
wheel is removed.

15.2

Installing the front wheel

Warning

Danger of accidents

Oil or grease on the brake discs reduces the braking effect.

–

Always keep the brake discs free of oil and grease.

–

Clean the brake discs with brake cleaner when necessary.

V00608-10

Main work

–

Remove spacers

–

Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:

–

Change front wheel bearing.

–

Clean and grease shaft seal rings

and contact surfaces

of the spacers.

Long-life grease (

p. 249)

–

Insert the spacers.

Summary of Contents for RC 390 2020








































































































































































































































































Search results

Summary of Contents for RC 390 2020

Reviews:

Related manuals for RC 390 2020

Brands by name

Popular brands

KTM RC 390 2020, Owner'S Manual

Search results

Summary of Contents for RC 390 2020

Reviews:

Related manuals for RC 390 2020

Brands by name

Popular brands