KTM RC 250 R, Owner'S Manual

Page: 14 / 101

6 CONTROLS
12
6.6 Map
‑
Select switch
L00556-10
The
Map
‑
Select
switch
1
is fitted on the left side of the handlebar.
Possible states
MAP 1
–
In this position, Mapping 1 is activated.
MAP 2
–
In this position, Mapping 2 is activated.
Two mappings can be stored in the control unit. The
Map
‑
Select
switch can be used to
change between these two mappings and thus to alter the engine characteristics. This
change can also be made while riding.
6.7 Launch
‑
Control button
L00465-13
The Launch
‑
Control button
1
is located on left side of the handlebar.
The Launch
‑
Control is activated by pressing the Launch
‑
Control button. This limits the
engine speed to an adjustable rpm until an adjustable speed is reached (see the MAYA
Instructions on the CD-ROM in the separate enclosure).
As soon as the set speed is reached, the
Launch
‑
Control is deactivated automatically.
6.8 Pit
‑
Limiter button
L00465-12
The Pit
‑
Limiter button
1
is fitted on the left side of the handlebar.
The Pit
‑
Limiter is activated by pressing the Pit
‑
Limiter button.
The Pit
‑
Limiter is active until the Pit
‑
Limiter button is pressed.
This limits the speed to an adjustable value (see the MAYA Instructions on the CD-ROM
in the separate enclosure).
6.9 Quick shifter switch
L00560-10
The quick shifter switch
1
is fitted above the tachometer.
Possible states
OFF
–
In this position, the quick shifter is deactivated.
ON
–
In this position, the quick shifter is activated.
This switch can be used to deactivate the quick shifter while riding, such as following
damage due to a fall.
6.10 Indicator lamps
L00560-01
Possible states
The yellow FI warning lamp lights up
–
The engine control unit has
detected a fault. Read out the fault memory (see the MAYA Instruction
on the CD-ROM in the separate enclosure).
The green indicator lamp flashes
–
Pit
‑
Limiter is active.
The green indicator lamp lights up
–
Launch
‑
Control is active.
The red warning lamp flashes
–
The oil pressure is too low.