KTM F9903T5, Owner'S Manual

Page: 162 / 344

10 RIDING INSTRUCTIONS
160
Note
Transmission damage
Incorrect use of the quick will damage the transmission.
The quick can only be used if the function is enabled in the combination instrument.
The quick is not active if you pull the clutch lever.
–
Only use the quick in the permitted speed range shown.
Info
If you hear unusual noises while riding, stop immediately, switch off the engine, and contact an autho-
rized KTM workshop.
402299-11
–
Shift into a higher gear when conditions allow (incline, road
situation, etc.).
–
Release throttle while simultaneously pulling the clutch lever,
shift into the next gear, release the clutch lever, and open the
throttle.
Info
The gear positions can be seen in the figure. The idle
position is between the first and second gears. First
gear is used for starting off or for steep inclines.
–
After reaching maximum speed by fully opening the throttle
grip, turn the throttle back so it is ¾ open. This will barely
reduce the speed, but fuel consumption will be considerably
lower.