KTM F9903R6, Setup Instructions

Page: 14 / 25

3 WORK
12
3.6 Installing the battery
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks or open flames away from the battery.
–
Only charge batteries in well-ventilated rooms.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes with water for at least 15 minutes and consult a doctor immediately if battery acid and
battery gases get into the eyes.
Caution
Danger of accidents
Electronic components and safety devices will be damaged if the battery is
discharged or missing.
–
Never operate the vehicle with a discharged battery or without a battery.
M00610-11
Main work
–
Position the battery in battery case
1
.
Guideline
The even side of the battery case must be opposite the
poles.
–
Position the battery and battery case in the battery compart-
ment.
–
Position the positive cable
2
and mount and tighten the
screw.
Guideline
Screw, battery termi-
nal M6 4.5 Nm
(3.32 lbf ft)
–
Position the negative cable
3
and mount and tighten the
screw.
Guideline
Screw, battery termi-
nal M6 4.5 Nm
(3.32 lbf ft)
S02275-10
–
Close the cover
4
and push down slightly.
The cover engages with an audible click.
Finishing work
–
Mount the seat. ( p. 9)
–
Set the time and date.