WORK 3
9
3.1
Installing the wind shield
K00846-11
–
Position wind shield
1
.
–
Mount and tighten screws
2
.
Guideline
Screw, wind shield
M5
3.5 Nm
(2.58 lbf ft)
3.2
Removing the seat
H02022-10
–
Insert the Race
‑
on key or the black ignition key into the seat
lock
1
and turn clockwise.
–
Raise the rear of the seat, pull the seat back, and lift it off.
–
Remove the key.
3.3
Mounting the seat
0
0
2
2
0
0
1
1
401677-10
–
Hook the catch
1
of the seat onto the fuel tank, lower the
rear and push it forward.
–
Insert locking pin
2
into the lock housing and push down the
rear of the seat until the locking pin engages with a click.
–
Check that the seat is correctly mounted.
3.4
Recharging the battery
Warning
Risk of injury
Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks or open flames away from the battery.
–
Only charge batteries in well-ventilated rooms.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes with water for at least 15 minutes and consult a doctor immediately if battery acid and
battery gases get into the eyes.
