12 SERVICE WORK ON THE CHASSIS
69
V00336-11
–
Position the upper triple clamp with the handlebar.
–
Position the clutch line and wiring harness.
–
Mount screw
4
but do not tighten yet.
H01637-10
–
Position the fork legs.
Bleeder screws
5
are positioned toward the front.
Info
The rebound damping is located in right fork leg
REB
(red adjusting screw). The compression damping is
located in left fork leg
COMP
(white adjusting screw).
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the top edge of the upper triple clamp.
V00338-10
–
Tighten screws
6
.
Guideline
Screw, top triple
clamp
M8
20 Nm (14.8 lbf ft)
–
Tighten screws
7
.
Guideline
Screw, bottom triple
clamp
M8
15 Nm (11.1 lbf ft)
V00337-10
–
Tighten screw
4
.
Guideline
Screw, top steering
head
M20x1.5
12 Nm (8.9 lbf ft)
V00337-11
–
Tighten screw
8
.
Guideline
Screw, top steering
stem
M8
20 Nm (14.8 lbf ft)