KTM F7303R2, Setup Instructions

Page: 35 / 45

3 WORK
33
3.21 Closing 2-stroke oil tank cap
E00861-11
–
Put the 2-stroke oil tank cap on and turn it clockwise.
–
Fold loop
1
down.
The 2-stroke oil tank cap engages.
3.22 Adding 2-stroke oil
Warning
Engine failure
The engine will not be lubricated unless there is 2-stroke oil in the oil tank.
If the oil level warning light lights up, the 2-stroke oil is sufficient for the remaining tank of fuel.
–
As soon as the oil level warning light lights up, ride for no longer than until the remaining fuel in the
tank is depleted.
–
At the next opportunity add 2-stroke oil before you refuel.
–
Time the oil pump if the 2-stroke oil hose has been removed or the 2-stroke oil tank has been fully
depleted in error.
–
Open 2-stroke oil tank cap. ( p. 32)
M01516-10
–
Fill the 2-stroke oil tank up to the lower edge
A
of the filler
neck.
2-stroke oil tank con-
tent approx. 0.7 l (0.7 qt.) Engine oil, 2-stroke
(
p. 40)
–
Close 2-stroke oil tank cap. ( p. 33)
3.23 Opening the filler cap
Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.