2 SETUP
14
F01148-10
–
Carefully pass the tail light cable through the frame, pay-
ing attention to the plug as you do so.
–
Position license plate holder on the rear.
–
Mount and tighten screws
co
with the washers.
F01145-10
–
Mount and tighten screw
ck
with the collar bushing.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
–
Mount and tighten screw
cl
.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
–
Mount and tighten screw
cm
with negative cable and con-
tact disk.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
F01159-10
–
Connect the tail light plug-in connector to the main wiring
harness plug-in connector.
