KTM F5003R1, Setup Instructions

Page: 9 / 21

WORK 3
7
3.3 Checking the play in the throttle cable
400192-11
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Turn the
throttle grip back and forth slightly and determine the play in
throttle cable
A
.
Throttle cable play
A
3 … 5 mm (0.12 … 0.2 in)
» If the throttle cable play does not meet the specified value:
–
Adjust the play in the throttle cable. ( p. 7)
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
–
Start the engine and let it run idle. Move the handlebar to and
fro over the entire steering range.
The idle speed must not change.
» If the idle speed changes:
–
Check throttle cable routing.
3.4 Adjusting the play in the throttle cable
V00671-10
–
Move the handlebar to the straight-ahead position.
–
Push back sleeve 1 .
–
Loosen lock nut 2 .
–
Adjust the play in the throttle cable by turning adjusting
screw
3
.
Guideline
Throttle cable play 3 … 5 mm (0.12 … 0.2 in)
–
Tighten lock nut 2 .
–
Slide on sleeve
1
.
3.5 Removing the passenger seat
Preparatory work
–
Remove the front rider's seat. ( p. 8)