KTM F5003R1, Setup Instructions

Page: 5 / 21

SETUP 2
3
2.1 Unpacking and setting up the vehicle
A00034-10
–
Remove the straps and box.
S01886-01
–
Remove the adhesive tape in the upper area of the motorcycle.
A00043-10
–
Roll down the film at the sides.
Info
To avoid damaging the motorcycle during unpacking,
leave the other films on the vehicle until you have fin-
ished work on the vehicle.
–
Remove the separate enclosure and unpack it. Check the sepa-
rate enclosure for completeness.
–
Check the vehicle for transport damage.
S01885-10
Condition
Left and right handlebar stub not mounted.
–
Remove protective film on the left and right handlebar
stub.
–
Mount left and right handlebar stub on the upper triple
clamp.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Mount and tighten screws 1 .
Guideline
Screw, handle-
bar stub M6 8 Nm (5.9 lbf ft)
Loctite ® 243™
–
Mount and tighten screws
2
.
Guideline
Screw, anti-rotation
lock, handlebar
stub M5 4 Nm (3 lbf ft)