KTM F4303U1, Owner'S Manual

Page: 86 / 130

15 ELECTRICAL SYSTEM
84
M00729-10
Main work
–
Connect a battery charger to the 12-V battery. Switch on the
battery charger.
Battery charger (58429074000)
In addition, this battery charger can be used to test the open-
circuit voltage, the starting ability of the 12-V battery, and
the alternator. It is impossible to overcharge the 12-V battery
using this device.
Info
Never remove cover
1
.
Charge the 12-V battery to a maximum of 10 % of the
capacity specified on battery housing
2
.
–
Switch off the battery charger after charging and disconnect
from the 12-V battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Recharge the 12-V battery
regularly when the motorcy-
cle is not being used
3 months
–
Position the negative cable and mount and tighten the screw.
–
Position the negative terminal cover.
Finishing work
–
Mount the front rider's seat. ( p. 59)
–
Mount the passenger seat. ( p. 58)
–
Set time and date. ( p. 37)
15.5 Changing the main fuse (EU/JP)
Warning
Fire hazard
Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The main fuse protects all electrical power consumers of the vehicle. The main fuse is under the seat.
Preparatory work
–
Remove the passenger seat. ( p. 58)