KTM F4303U1, Owner'S Manual

Page: 60 / 130

12 SERVICE WORK ON THE CHASSIS
58
F00879-10
Main work
–
Push dust boots
1
of both fork legs downward.
Info
The dust boots remove dust and coarse dirt particles
from the inside fork tubes. Over time, dirt can accumu-
late behind the dust boots. If this dirt is not removed,
the oil seals behind can start to leak.
Warning
Danger of accidents Oil or grease on the brake discs
reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when nec-
essary.
–
Clean and oil the dust boots and inside fork tubes of both fork
legs.
Universal oil spray ( p. 120)
–
Press the dust boots back into the installation position.
–
Remove the excess oil.
Finishing work
–
Take the motorcycle off the front lifting gear. ( p. 57)
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 56)
12.6 Removing the passenger seat
H01991-10
–
Insert the ignition key in seat lock
1
and turn it clockwise.
–
Raise the rear of the seat, push it towards the rear, and lift it
off.
–
Remove the ignition key from the seat lock.
12.7 Mounting the passenger seat
H01992-01
–
Attach hooks
1
on the passenger seat to seat mounting
2
on the subframe, and lower it at the rear while pushing for-
ward.
–
Press passenger seat downward until it clicks into place.